Auch in der Corona-Krise ist die Schreiner Group weiterhin für Sie da

Liebe Kunden, Lieferanten, Partner und Mitarbeiter,

die derzeitige Corona-Krise stellt uns alle vor große Herausforderungen. In der momentanen Ausnahmesituation hat die Schreiner Group zwei große Ziele, an denen die gesamte Belegschaft intensiv und engagiert arbeitet: der Schutz der Menschen und die Aufrechterhaltung der Lieferfähigkeit.

Lesen Sie die vollständige Stellungnahme unserer Geschäftsführung


Schreiner Group continues to stand by your side also during the corona crisis

Dear customers, suppliers, partners and employees,

The current corona crisis confronts all of us with great challenges. In the present emergency situation, Schreiner Group has two major aims that our entire workforce is pursuing with intensity and dedication: protecting people and sustaining our ability to supply our products.

Read the full statement issued by our CEO

Recommendations for the Transport, Storage and Processing of Labels

Transport and Storage of Label Rolls

  • Protect the label rolls from exposure to sunlight and heat (e.g. radiators)
  • Store the label rolls in the PE bag or shrink wrap of the original packaging in a cool and dry place until used and avoid extreme temperature fluctuations (optimal conditions: 64 °F ± 9 °F/18 °C ± 5 °C, 40–60% relative humidity)
  • Stack the label rolls on top of each other, lying flat and centered
  • Prevent external pressure, e.g. by too tight packaging or weight from above
  • For extended periods of intermediate storage during production, store products with particularly free-flowing adhesives in cool boxes, if possible at 50–54 °F/10–12 °C.

Preparation of Label Processing

Instructions for the Cleaning of Receiving Surfaces

  • The mounting surface must be dry and free of dirt, oil residues and release agents.
  • Loose surface particles and oxidation layers reduce durability as a bonded joint is always only as strong as its substrate.
  • Recommended cleaning agents are grease-free solvents such as isopropyl alcohol (1:1 mixture), acetone, MEK or cleaning solvent. Please test the substrate for compatibility with the solvent before use. In case of incompatibility of the processing surface with the chosen cleaning agent, please switch to another product.
  • Plastic materials may leak plasticizers that can have a negative impact on adhesive properties.
  • Surfaces can have varying characteristics and show different adhesive strength effects.

General Information on Label Dispensing

  • Apply contact pressure to labels after application (e.g. with a squeegee, pressure roll or pressing fixture) to ensure adhesion.

Manual Label Dispensing

  • When dispensing labels manually please keep in mind that skin lipids and “parking” of the labels on work clothes have a negative effect on adhesive properties.

Automated Label Dispensing

  • An acute angle of the dispensing edge improves dispensing (stripping) performance
  • Keep the dispensing edge burr-free
  • Keep all movable elements of the web/tape guide running smoothly by cleaning regularly
  • Keep optical and mechanical scanning elements clean and dust-free
  • Do not subsequently tighten the label rolls – either manually or inside the printing or dispensing system

When Using Thermal Transfer Printers

  • Remove dust from the inside of the printer regularly when changing rolls
  • Do not touch the printing areas when changing rolls; it is best to touch only the beginning of the roll, wearing gloves if necessary.

Specific Information for RFID Labels

The following should be avoided:

  • Electrical charges above +/-2 kV peak maximum
  • Alternating magnetic fields
  • Microwaves
  • Gamma rays
  • Folding or unnecessary bending of the ((rfid)) label
  • Strong contact pressure or impact on the ((rfid)) label
  • Tossing of the roll or inadequately protected shipping (use special cardboard or sufficient dunnage

Important Note

The above information is provided strictly as basic information which may be extended or modified by specifications adapted to the respective products. Before using a product, please obtain qualified advice from the specialists of Schreiner Group or test yourself whether the product concerned, also with respect to possible influences which may affect the application (e.g. transportation, storage or processing conditions), is suitable for your intended purpose.